Example Decoded Log Page Dump - SAS Disk

Top  Previous  Next

The results below were run under SPARC Solaris 10 using a Seagate ST3146855SS SAS disk.

 

# /etc/smartmon-ux -C /dev/rdsk/c4t17d0s0

SMARTMon-UX [Release 1.36, Build  8-JUN-2008] - Copyright 2001-2008 SANtools(R), Inc. http://www.SANtools.com

Discovered SEAGATE ST3146855SS S/N "3LN29QG4" on /dev/rdsk/c4t17d0s0 (SMART enabled)(140014 MB)

 

Statistical log pages dump below [# of bytes reserved for value in device]:

 Write errors corrected with possible delays: 0 [4]

 Total Write errors: 0 [4]

 Write errors corrected: 0 [4]

 Times correction algorithm processed (on Writes): 0 [4]

 Bytes processed (on Writes): 353948013568 [8]

 Unrecovered errors (on Writes): 0 [4]

 Read errors corrected without substantial delay: 605260 [4]

 Read errors corrected with possible delays: 9 [4]

 Total Read errors: 0 [4]

 Read errors corrected: 605269 [4]

 Times correction algorithm processed (on Reads): 605996 [4]

 Bytes processed (on Reads): 652188835328 [8]

 Unrecovered errors (on Reads): 727 [4]

 Verify errors corrected without substantial delay: 590 [4]

 Verify errors corrected with possible delays: 0 [4]

 Total Verify errors: 0 [4]

 Verify errors corrected: 590 [4]

 Times correction algorithm processed (on Verifys): 590 [4]

 Bytes processed (on Verifys): 0 [8]

 Unrecovered errors (on Verifys): 0 [4]

 Total Non-medium errors: 0 [4]

 Current temperature +/- 3 degrees C: 32

 Reference temperature +/- 3 degrees C: 68

 Background scanning status: 8

 Number of background scans performed: 35

 Background scan percentage completed: 35

 SAS Phy #0 (50-00-C5-00-06-94-BF-FD) - Invalid dwords:  0

 SAS Phy #0 (50-00-C5-00-06-94-BF-FD) - Running disparity errors:  0

 SAS Phy #0 (50-00-C5-00-06-94-BF-FD) - Loss of dword syncs:  0

 SAS Phy #0 (50-00-C5-00-06-94-BF-FD) - Reset problems:  0

 

 

Program Ended.

Note that the dump provides on the SAS world wide names and transport errors.