Vendor-Unique Enclosure Data

There is a significant amount of code (several thousand lines) in SMARTMonUX to deal with reporting vendor-unique data from a variety of SES-compliant enclosure manufacturers. Furthermore, as enclosure manufacturers typically sell into the OEM and reseller marketplace, having access to this information can provide you valuable information which might not be available through tools offered by your subsystem supplier.

Below is a list of information on enclosure manufacturers and some of the vendor-unique information that we report. If your manufacturer is not listed, it is still quite probable that a significant amount of hidden, vendor-unique data will still be reported ... information that is NOT available via programs supplied by your storage vendor. That is because the vast majority of storage vendors do not make their own enclosures, rather they select off-the-shelf or customized SES-compliant enclosures from one of a small family of enclosure manufacturers and brand it as their own. Because of non-disclosure constraints, we cannot reveal all of the products we provide additional information on, but we can provide the following information:

Make

Model(s)

Vendor-Unique Data/Notes (All returned with -E+ unless otherwise noted)

DotHill

SANnet 2

SANnet II

SANnet 1

•	Fan RPM details (cross references speed setting with actual RPMs)

Intel

McKay Creek Intel Storage Server family computers (SSR212MC and SSR212MC2)

•	CPU temperature, DIMMs, Motherboard

LSI

Pro Fibre Family

Shea SAS/SATA Family

•	Feature code and serial numbers for SES elements

•	Feature codes, all serial numbers of components and full configuration information

Xyratex

Salient family

•	LRC Revision level

Xyratex

Goshawk (16 & 12 bays)

includes enclosures with RAID engines

•	LRC or ESH firmware and part no

•	Most dip switch settings

•	In & Out Port, Host, Loop and Expansion present and good status where applicable.

•	SES Device layout map - device slot and module locations

•	FRU information

Xyratex

Osprey / Hawk (14 bays)

•	LRC or ESH firmware and part no

•	OPS firmware, type and part no

•	Enclosure serial number

•	Device layout map - device slot and module locations

•	FRU information

Xyratex

All switched ("Firebird" equipped enclosures) also display this info

•	Firebird-equipped switching enclosures also report:

•	Hex dump of ESH pages 80h - 85h (-EH)

•	Element 80 status text is polled (-E and -E+)

•	ESH Port A/B Event status pages 80h & 81h for each device and host. Includes error counters, utilization %, and clock information.

•	ESH Port A/B Config pages 82h & 83h which includes error thresholds, status bits, and global control settings

•	ESH Loop A/B Config pages 86h & 87h

All

•	ASCII Hex bytes for all vendor-unique elements while polling (-E)

Output from Various SES Enclosures (We changed only the serial and WWN numbers for privacy reasons).

Sun SES Enclosure

SUNWGS INT FCBPL WWN=50-80-02-00-00-88-88-88:

Device #0 OK Slot=00h

Device #1 OK Slot=01h

Device #2 Not Installed Slot=02h

Device #3 OK Slot=03h

Device #4 Not Installed Slot=04h

Device #5 Not Installed Slot=05h

Device #6 Unsupported Slot=08h

Device #7 Unsupported Slot=09h

Device #8 Unsupported Slot=0ah

Device #9 Unsupported Slot=0bh

Device #10 Unsupported Slot=0ch

Device #11 Unsupported Slot=0dh

Temperature Sensor #0 OK 81F/27C

Temperature Sensor #1 Not Installed

SSC100 (Base Backplane) #0 OK

SSC100 (Base LoopB) #1 OK

SSC100 (Expansion Backplane) #2 Not Installed

SSC100 (Expansion LoopB) #3 Not Installed

Language Element #0 Unsupported

SES Firmware Revision: "9226"

Element Type Descriptors Information

Device = "Disks - 6 Base (Std), 6 Expansion (Opt)"

Temperature Sensor = "Temperature Sensors - 0 Base, 1 Expansion"

VendorUnique Element (82) = "SSC100's - 0=Base Bkpln, 1=Base LoopB, 2=Exp Bkpln, 3=Exp LoopB"

Language Element = "Default Language is USA English, ASCII"

Element Descriptors Information

SSC100 (Base Backplane) (0) "9226/ FD99 9"

SSC100 (Base LoopB) (1) "9226/ FD99 0"

SSC100 (Expansion Backplane) (2) "0000/ 0000 0"

SSC100 (Expansion LoopB) (3) "0000/ 0000"

LSI (formerly IBM) ProFibre

LSI DF4000J WWN=20-00-00-80-E5-88-88-88:

Device #0 OK Slot=00h

Device #1 OK Slot=01h

Device #2 OK Slot=02h

Device #3 OK Slot=03h

Device #4 OK Slot=04h

Device #5 OK Slot=05h

Device #6 OK Slot=06h

Device #7 Not Installed Slot=07h

Device #8 Not Installed Slot=08h

Device #9 Not Installed Slot=09h

Device #10 Not Installed Slot=0ah

Device #11 Not Installed Slot=0bh

Device #12 Not Installed Slot=0ch

Device #13 Not Installed Slot=0dh

Device #14 OK Slot=0eh

Power Supply #0 OK

Power Supply #1 OK

Cooling Element #0 OK fan at lowest speed

Cooling Element #1 OK fan at lowest speed

Cooling Element #2 OK fan at lowest speed

Temperature Sensor #0 OK 106F/41C

Temperature Sensor #1 OK 99F/37C

SESElectronics Processor #0 OK [ACTIVE]

SESElectronics Processor #1 OK [PASSIVE]

SES Firmware Revision: "0310"

Element Descriptors Information

Power Supply (0) "FN 07N2030 SN 1Z3YE1C8888"

Power Supply (1) "FN 07N2030 SN 1Z3YE23Z888"

Cooling Element (0) "FN 07N2030 SN 1Z3YE1C7777"

Cooling Element (1) "FN 07N2030 SN 1Z3YE23Z888"

Cooling Element (2) "FN 07N2029 SN 1Z3YC1C9999"

SESElectronics Processor (0) "FN 07N2026 SN 1Z3Y61C8888"

SESElectronics Processor (1) "FN 07N2026 SN 1Z3Y61C9999"

Threshold Information Warning Range Critical Range

Temperature Sensor #0: 35 - 74 28 - 78

Temperature Sensor #1: 35 - 74 28 - 78

LSI SAS Shea Enclosure

LSILOGIC SYM3600-SAS WWN=10-00-00-A0-B8-1D-2A-84:

Vendor-specific features (Notes)

Backplane FRU P/N: PN 14617-01RWK

System serial number: SN 0617053320

FRU vendor: VN ENGENIO

FRU manufacture date: DT 05/2006

FRU type: FT MIDPLANE

ESM P/N: PN 21204-06

ESM serial number: SN SX70500654

ESM vendor: VN ENGENIO

ESM manufacture date: DT 02/2007

ESM type: FT 3600_ESM

PSU(0) P/N: PN 14572-05

PSU(0) serial number: SN ZST061400474

PSU(0) vendor: VN ENGENIO

PSU(0) manufacture date: DT 04/2006

PSU(0) type: FT PWRSUPLY

PSU(1) P/N: PN 14572-05

PSU(1) serial number: SN ZST061400486

PSU(1) vendor: VN ENGENIO

PSU(1) manufacture date: DT 04/2006

PSU(1) type: FT PWRSUPLY

ArrayDevice #0 OK SelID=00h [Row=1 Col=1]

ArrayDevice #1 OK SelID=00h [Row=1 Col=2]

ArrayDevice #2 OK SelID=00h [Row=1 Col=3]

ArrayDevice #3 OK SelID=00h [Row=1 Col=4]

ArrayDevice #4 Not Installed SelID=00h [Row=2 Col=1]

ArrayDevice #5 OK SelID=00h [Row=2 Col=2]

ArrayDevice #6 Not Installed SelID=00h [Row=2 Col=3]

ArrayDevice #7 Not Installed SelID=00h [Row=2 Col=4]

ArrayDevice #8 Not Installed SelID=00h [Row=3 Col=1]

ArrayDevice #9 Not Installed SelID=00h [Row=3 Col=2]

ArrayDevice #10 Not Installed SelID=00h [Row=3 Col=3]

ArrayDevice #11 OK SelID=00h [Row=3 Col=4]

Enclosure #No visual failure indication,No visual warning indication,No failure requested,No warning requested

SESElectronics Processor #0 OK [ACTIVE]

SESElectronics Processor #1 OK [PASSIVE]

Temperature Sensor #0 OK 81F/27C

Temperature Sensor #1 OK 81F/27C

Temperature Sensor #2 OK 82F/28C

Temperature Sensor #3 OK 77F/25C

Cooling Element #0 OK fan at speed 3 [actual speed 3450 rpm]

Cooling Element #1 OK fan at speed 3 [actual speed 3500 rpm]

Cooling Element #2 OK fan at speed 3 [actual speed 3720 rpm]

Cooling Element #3 OK fan at speed 3 [actual speed 3770 rpm]

Power Supply #0 OK

Power Supply #1 OK

VoltageSensor #0 OK Input voltage 116.2 VAC RMS

VoltageSensor #1 OK Input voltage 33.0 VAC RMS

VoltageSensor #2 OK Input voltage 33.0 VAC RMS

VoltageSensor #3 OK Input voltage 17.9 VAC RMS

VoltageSensor #4 OK Input voltage 17.9 VAC RMS

VoltageSensor #5 OK Input voltage 12.0 VAC RMS

VoltageSensor #6 OK Input voltage 11.9 VAC RMS

Tray #0 0 OK TrayID=2

SES Firmware Revision: "0166"

Element Type Descriptors Information

SESElectronics Processor = "3"

Tray = "Shea Tray"

Element Descriptors Information

Array Device (0) "SLOT 01"

Array Device (1) "SLOT 02"

Array Device (2) "SLOT 03"

Array Device (3) "SLOT 04"

Array Device (4) "SLOT 05"

Array Device (5) "SLOT 06"

Array Device (6) "SLOT 07"

Array Device (7) "SLOT 08"

Array Device (8) "SLOT 09"

Array Device (9) "SLOT 10"

Array Device (10) "SLOT 11"

Array Device (11) "SLOT 12"

Enclosure (0) "ENCLOSURE 02"

3 (0) "PN 21204-06 SN SX70500654 VN ENGENIO DT 02/2007 FT 3600_ESM"

3 (1) "PN 21204-06 SN SX70500665 VN ENGENIO DT 02/2007 FT 3600_ESM"

Power Supply (0) "PN 14572-05 SN ZST061400474 VN ENGENIO DT 04/2006 FT PWRSUPLY"

Power Supply (1) "PN 14572-05 SN ZST061400486 VN ENGENIO DT 04/2006 FT PWRSUPLY"

Shea Tray (0) "PN 14617-01RWK SN 0617053320 VN ENGENIO DT 05/2006 FT MIDPLANE"

Module Locations - Front View

Col-1 Col-2 Col-3 Col-4

+--------------------------------------+

+--------------------------------------+

Module Locations - Rear View

+--------------------------------------+

| PSU / Cooling | PSU / Cooling |

| First | Second #1 |

+--------------------------------------+

Internal Device Information

Bay Type SAS Expander Address SAS Device Address

------------------------------------------------------------

1 SAS 50-0A-0B-82-E0-89-40-00 50-00-C5-00-06-94-C6-E9

2 SAS 50-0A-0B-82-E0-89-40-00 50-00-C5-00-06-94-BE-85

3 SAS 50-0A-0B-82-E0-89-40-00 50-00-C5-00-06-94-BB-79

4 SAS 50-0A-0B-82-E0-89-40-00 50-00-C5-00-06-94-BE-AD

6 SAS 50-0A-0B-82-E0-89-40-00 50-00-C5-00-06-94-C0-DD

12 SAS 50-0A-0B-82-E0-89-40-00 50-00-C5-00-06-94-BF-FD

DotHill

DotHill ERMFC SANnet WWN=20-20-00-C0-FF-88-88-88:

Device #0 OK Slot=00h

Device #1 OK Slot=01h

Device #2 OK Slot=02h

Device #3 OK Slot=03h

Device #4 OK Slot=04h

Device #5 OK Slot=05h

Device #6 OK Slot=06h

Device #7 OK Slot=07h

Device #8 OK Slot=08h

Device #9 OK Slot=09h

Device #10 OK Slot=ffh

Device #11 OK Slot=ffh

Power Supply #0 OK

Power Supply #1 OK

Power Supply #2 OK

Cooling Element #0 OK fan at intermediate speed

Cooling Element #1 OK fan at intermediate speed

Cooling Element #2 OK fan at intermediate speed

Temperature Sensor #0 OK 75F/24C

Temperature Sensor #1 OK 84F/29C

Temperature Sensor #2 OK 77F/25C

Temperature Sensor #3 OK 79F/26C

Temperature Sensor #4 OK 72F/22C

Temperature Sensor #5 OK 88F/31C

Temperature Sensor #6 OK 84F/29C

Audible Alarm #0 OK ENABLED

NonvolatileCache Unit #Unsupported

Language Element #0 Unsupported

VoltageSensor #0 OK Input voltage 53.0 VAC RMS

VoltageSensor #1 OK Input voltage 122.7 VAC RMS

VoltageSensor #2 OK Input voltage 53.0 VAC RMS

VoltageSensor #3 OK Input voltage 122.8 VAC RMS

VoltageSensor #4 OK Input voltage 53.0 VAC RMS

VoltageSensor #5 OK Input voltage 122.8 VAC RMS

VoltageSensor #6 OK Input voltage 50.3 VAC RMS

VoltageSensor #7 OK Input voltage 120.2 VAC RMS

VoltageSensor #8 Unsupported

VoltageSensor #9 Unsupported

Event Reporting Module Cards #0 OK

Event Reporting Module Cards #1 OK

Drive I/O Cards #0 OK

Drive I/O Cards #1 Non-Critical

Host I/O Cards #0 OK

Host I/O Cards #1 Not Installed

Host I/O Cards #2 OK

Host I/O Cards #3 Not Installed

SES Firmware Revision: "B300"

Help Text

For questions regarding the SANnet FC, please contact Dot Hill Systems Technical Support at +1 (212) 989-4455

or toll-free (800) 727-3836 in the U.S.

Element Type Descriptors Information

Device = "Disk Drives and RAID Controllers"

Power Supply = "Power Supplies"

Cooling Element = "Cooling Fans"

Temperature Sensor = "Temperature Sensors"

Audible Alarm = "Alarm"

NonvolatileCache Unit = "EEPROM"

Language Element = "Language"

VoltageSensor = "Power Supply Voltage Sensors"

VendorUnique Element (80) = "Event Reporting Module Cards"

VendorUnique Element (81) = "Drive I/O Cards"

VendorUnique Element (82) = "Host I/O Cards"

Threshold Information Warning Range Critical Range

Temperature Sensors #0: 22 - 65 20 - 75

Temperature Sensors #1: 22 - 65 20 - 75

Temperature Sensors #2: 22 - 65 20 - 75

Temperature Sensors #3: 22 - 65 20 - 75

Temperature Sensors #4: 22 - 65 20 - 75

Temperature Sensors #5: 22 - 65 20 - 75

Temperature Sensors #6: 22 - 65 20 - 75

XYRATEX SBOD & EBOD (1603)

See Widget screen shot.

Page url: http://www.santools.com/santool/index.html?vendor_uniqueenclosuredata.htm