The results below were run under SPARC Solaris 10 using a Seagate ST3146855SS SAS disk.
# /etc/smartmon-ux -C /dev/rdsk/c4t17d0s0
SMARTMon-UX [Release 1.36, Build 8-JUN-2008] - Copyright 2001-2008 SANtools(R), Inc. http://www.SANtools.com
Discovered SEAGATE ST3146855SS S/N "3LN29QG4" on /dev/rdsk/c4t17d0s0 (SMART enabled)(140014 MB)
Statistical log pages dump below [# of bytes reserved for value in device]:
Write errors corrected with possible delays: 0 [4]
Total Write errors: 0 [4]
Write errors corrected: 0 [4]
Times correction algorithm processed (on Writes): 0 [4]
Bytes processed (on Writes): 353948013568 [8]
Unrecovered errors (on Writes): 0 [4]
Read errors corrected without substantial delay: 605260 [4]
Read errors corrected with possible delays: 9 [4]
Total Read errors: 0 [4]
Read errors corrected: 605269 [4]
Times correction algorithm processed (on Reads): 605996 [4]
Bytes processed (on Reads): 652188835328 [8]
Unrecovered errors (on Reads): 727 [4]
Verify errors corrected without substantial delay: 590 [4]
Verify errors corrected with possible delays: 0 [4]
Total Verify errors: 0 [4]
Verify errors corrected: 590 [4]
Times correction algorithm processed (on Verifys): 590 [4]
Bytes processed (on Verifys): 0 [8]
Unrecovered errors (on Verifys): 0 [4]
Total Non-medium errors: 0 [4]
Current temperature +/- 3 degrees C: 32
Reference temperature +/- 3 degrees C: 68
Background scanning status: 8
Number of background scans performed: 35
Background scan percentage completed: 35
SAS Phy #0 (50-00-C5-00-06-94-BF-FD) - Invalid dwords: 0
SAS Phy #0 (50-00-C5-00-06-94-BF-FD) - Running disparity errors: 0
SAS Phy #0 (50-00-C5-00-06-94-BF-FD) - Loss of dword syncs: 0
SAS Phy #0 (50-00-C5-00-06-94-BF-FD) - Reset problems: 0
Program Ended.
Note that the dump provides on the SAS world wide names and transport errors.
Page url: http://www.santools.com/santool/index.html?example_decoded_log_page_dump_.htm